SyntheSys Defence extends its Tactical Data Link Online Training Programme

 

Following the successful delivery of a range of online Tactical Data Link (TDL) Training courses earlier this year, registration is now open for a further two online courses.

Delegates can join us for two introductory courses, taking place week commencing 16^th November 2020.  We will begin the week with a short, half day course on Joint Range Extension Application Protocol (JREAP) where delegates will gain a comprehensive understanding of the protocol.

Thereafter, the Introduction to Multifunctional Information Distribution System (MIDS) Link 16 Training will run between 17^th – 20^th November 2020.  This course covers both technical and operational employment of MIDS Link 16 and aims to give a balanced understanding of technical characteristics.

Pricing information for these courses is available on application, please contact us via: training@synthesys.co.uk

For more general information including lesson breakdown, benefits of attending and our approach to online training, please visit: http://www.synthesys-defence.co.uk/online-training.html

 

Online Multifunctional Information Distribution Systems (MIDS) Link 16 Training

Registrations are now being accepted for the forthcoming MIDS Link 16 Training course which is due to take place online between 22 - 26 June 2020.  The aim of the course is to provide students with a comprehensive understanding of MIDS Link 16 and covers both technical and operational employment of the system.

By the end of the course, students will be able to explain, describe, identify, interpret and recall a range of MIDS Link 16 related protocols and data including MIDS terminal characteristics, J-Series message catalogue, Frequency Clearance Agreements and the use of the Operational Tasking (OPTASK) Link.  The course will also explore the planned changes to the terminals used by Link 16 in accordance with Block Upgrade 2.

The course is spread over 5 days, in sessions of approximately 3.5 to 4 hours in duration to ensure an engaging learning experience and is aligned with what students receive when attending our MIDS Link 16 classroom course.

Training delegates receive unlimited access to the SyntheSys Defence Community Portal along with electronic copies of the course material, and the MIDS Link 16 manual via the portal.

For more information including learning outcomes and the full syllabus, please visit: http://www.synthesys-defence.co.uk/mids-link-16-online-training.html

If you would like to register your interest, receive pricing information or discuss your training requirement, please contact training@synthesys.co.uk

Summer 2019 UK Tactical Data Link Training Date Confirmed - Gain a Deep Understanding of Both MIDS Link 16 and JREAP

By popular demand, SyntheSys is extending the 2019 Tactical Data Link (TDL) Training programme to include a Multifunctional Information Distribution System (MIDS) Link 16 and Joint Range Extension Application Protocol (JREAP) training course.

The three-and-a-half-day course will be taking place in Lincoln, United Kingdom 16^th - 19^th July 2019 with two-and-a-half-days focus on MIDS Link 16 being immediately followed by a single day’s JREAP training.  The course is modular in approach and as such, delegates are invited to join the combined course, or tailor attendance based on training requirements.

The Link 16 element is primarily aimed at those personnel who require a balanced understanding of MIDS Link 16.  Consequently, the syllabus has been designed to cover both technical and operational employment of MIDS Link 16.  Students can expect to examine and study elements such as MIDS Architecture, Interoperability, Terminals & Block Upgrade 2, MIDS Initialisation / Synchronisation as well as Surveillance and Weapons Operations.

The JREAP element of the training explains the benefits of the JREAP protocol and also provides technical detail of how the system works.  The day starts with a basic introduction to JREAP and builds on this knowledge by examining Full Stack and Application Layer, JREAP messages and an overview of relevant standards.  The latter part of the course is practical in nature and utilises the Operational Tasking (OPTASK) Link JRE Segment 11.1; we will spend time operating the SAIC JRE Software.

The course has been designed to encompass both the NATO Allied Tactical Data Link Publications (ATDLPs) and the United States (US) Military Standards (MIL-STDs) documentation.  Furthermore, the course has utilised operator procedures detailed within both NATO ATDLP-7.33 and US Joint Multi-TADIL Operating Procedures (JMTOP) (Chairman Joint Chiefs of Staff Manual CJCSM 6120.01). 

Who Should Attend

• Anyone with a need to expand their MIDS Link 16 and JREAP knowledge in theoretical and practical areas of technical specifications, planning, operations, troubleshooting and analysis.  The course may be especially beneficial for the following personnel:
• Operators employed in Data Link Management Centres (Planners, Network Designers, Network Managers etc.) - gain a better understanding of TDL concepts
• Operators utilising TDLs in operations or exercises (Airborne, Naval or Ground-based) - enhance your knowledge to improve your operational awareness
• Managers responsible for the direction of TDL operations - improve your comprehension of the architectures under your command
• Individuals responsible for the procurement of TDL systems - increase your understanding of the operator’s requirements
• Members of industry who build and design TDL systems - better understand the needs of your customers

To book your place on this course, email training@synthesys.co.uk 

or call +44(0) 1947 821 464

German Air Force and AIRBUS Defence & Space Receive SyntheSys Link 16 Training

Once again we are pleased to announce the successful delivery of Link 16 training to both the German Air Force and AIRBUS engineering staff.

The two and a half day training course provided personnel with a balanced and in-depth understanding of both the operational and technical aspects of JTIDS/MIDS Link 16.  The training focused on the Typhoon and investigated areas in which its interoperability could be improved.  Of particular interest to the attendees was the complex exchange of the J12.6 Target Sorting Message when utilised on both NPG 9 (Control) and NPG 19 (Fighter-to-Fighter A).  All those who attended were also able to benefit from the Link 16 simulation software - Daronmont Data Link Training Suite 16.  The use of this software supported each individual in acquiring a clearer understanding of the subjects taught.

If you would like to know more about how SyntheSys can support your TDL training requirements or enhance the TDL knowledge of your personnel through interactive simulation and real world software, please contact training@synthesys.co.uk

Multi National Personnel Complete SyntheSys Data Link Manager (DLM)/Interface Control Officer (ICO) Training Course

We are pleased to announce that personnel from the Norwegian TDL Squadron, Swedish and Finnish JDLOC and Royal Netherlands Air Force have successfully completed our three week DLM/ICO Training Course.

The course was hosted by the Norwegian TDL Squadron at Jørstadmoen camp in the picturesque area of Lillehammer.  Attendees were provided with in depth instruction on Link 1, 11, 16, 22, Variable Message Format and Joint Range Extension Application Protocols.  Using their acquired knowledge and working in small groups, they then continued with a series of challenging Multi TDL Planning exercises, where they had to define progressively more complex TDL architectures and subsequently coordinate the correct allocation of TDL parameters.  Multi National operations and exercises are increasingly demanding more from DLM/ICO and Data Link Management Cell personnel.  Accordingly, our practical modules are designed to thoroughly test, educate and ultimately develop these personnel for the challenges that lie ahead.

Students then briefed their plan before testing and ultimately validating their architecture through the use of simulation and real world operational software.  This interactive learning environment enabled all students to fully visualise their operational plan, identifying elements such as the potential for data looping or the misallocation of critical TDL duties and their impact.  This allowed each individual to manage their architecture as a DLM/ICO would, helping to build confidence, and to apply their newly gained skills and theory in an enjoyable and cooperative learning atmosphere.

SyntheSys would like to thank all those who attended, especially the Norwegian TDL Squadron for hosting this event.  Our next course will be held at CAOC Uedem in June, once again continuing to attract more interest than there are places available.  

If you, or any of your team, want to learn more about the fundamentals of a Data Link environment and how to plan, design, manage and analyse Multi Link Networks, contact our training team here. For details of our 2015 course dates and to secure your FREE copy of the full syllabus, visit our website here

Personnel from Royal Air Force Brize Norton undertake SyntheSys JTIDS/MIDS Link 16 Training

As part of our on-going commitment in support of the A400M Atlas programme at RAF Brize Norton, we are pleased to announce that we have just delivered two days of JTIDS/MIDS Link 16 training.

The training was provided to military and civilian personnel involved in the support of the first MIDS equipped A400M Atlas.  Personnel were instructed on the basic components of JTIDS/MIDS before progressing to more complex areas such as crypto loading, initialisation and joining a network.  The training placed particular emphasis on the operational use of JTIDS/MIDS and how it can be employed to increase operational effectiveness.  This culminated in the use of the Data Link Training Suite which allowed personnel to explore exactly how they will benefit from utilising JTIDS/MIDS in the future.

We would like to thank all of those involved in the training for their kind hospitality and support.

For further information on our training courses or any of our training and support services, please contact training@synthesys.co.uk or call UK +44 (0) 1947 821464.